How to Restore a Weathered Deck

A dilapidated old deck can make you feel embarrassed, especially in front of outsiders. Your deck is an integral part of your home, and it’s worth taking care of. If the foundation of your deck is up to the mark, you can consider restoring it. This renovation project calls for taking care of some essential things.

The first step in restoring a weathered deck is sanding it down. This will remove any loose paint and give the wood a smooth surface for refinishing. You can also clean your deck with soap and water, then let it dry completely before moving on to the next step.

If there are areas of rot or damage, now is the time to fix them as well. Then apply one coat of primer followed by two coats of stain-blocking sealer. Finally, use oil-based exterior enamel paint for color and protection against weather elements like rain and snowfall.

A new deck can make your home look fresh again! And if you have kids or pets, protecting their safety should be the top priority when choosing materials that won’t splinter or scratch them up too much if they fall onto it from above.

Let’s discuss some influential instructions or tips for grooming a weathered deck.

Effective Instructions and Tips to be Followed

Carry out the inspection and prepare the deck for restoration
You can begin by looking at the entire deck. Pay particular attention to any surfaces in direct contact with the ground, such as the posts, stair stringers, or joists on ground level.

If you can sink a screwdriver into a post or joist, it indicates decay. Remove the damaged and rotted part. You should also consider how much time you want to spend restoring the entire surface area of your deck because this will affect which products you use during the process.

Once everything is clear, then comes preparing the surface for painting with an oil-based primer-sealer followed by two coats of exterior paint in either semi-gloss or satin finish depending on whether you prefer matte or shiny surfaces, respectively (or both).

This will ensure that no moisture penetrates through cracks between boards when they expand due to changes in temperature throughout different seasons while still allowing natural light penetration underneath them so plants can grow there too if desired.

Safeguard the surroundings

Ensure that all of your plants and trees are well-watered, so they don’t dry out during the process. You also want to make sure that there aren’t any loose boards or nails sticking up from the surface, as this could cause damage to people walking on it.

If you have pets, keep them inside until everything has dried entirely because they can easily get hurt by sharp objects like these. Finally, if you have a pool nearby, then cover it with a tarp before starting work to prevent any accidents from occurring while you’re working on your deck.

how to restore a deck

Remove All Loose Wood

After cleaning off old paint and other debris from your deck boards, use a hammer drill fitted with a masonry bit to bore holes at each end of every loose board along its entire length; this will allow water trapped inside them during rainstorms to drain out instead of rotting them from within over time.


Sanding the entire surface of the wood down to bare wood using 80 grit sandpaper will remove all dirt and grime as well as any loose paint or varnish on the surface of your deck boards, so they are ready for refinishing later on in the process.

Then use 100 grit sandpaper to smooth out any rough patches left behind from step one before moving onto 150 grit paper, which will leave your boards looking silky smooth without any scratches that would be visible once the finished product has been applied later on in the restoration process.

Finally, finish off-board surfaces with 220 grit sandpaper which will give them a nice polished look while also removing any leftover marks from the previous two stages of the restoration process, making sure that the final coat goes on evenly across the whole surface area of each individual board without having uneven areas like some spots being shinier than others.

Staining the Deck

Stains come in a variety of colors and finishes, so you must choose one that fits your home’s style and complements its surroundings. If you want to keep costs down, consider using an oil-based stain instead of a water-based one.

Oil stains tend to last longer than water stains because they penetrate deeper into wood fibers and offer better protection against moisture damage from rain or snowmelt.

They also provide more even coverage than water stains do when applied with a brush or roller. However, if cost isn’t an issue for you, then go ahead and use whatever type of deck stain strikes your fancy!

If you want to know more about staining the deck then click here

Staining the Deck

Applying a Paint-Based Protective Seal

Paint-based protective sealers have been around for decades because they work well in protecting decks against weathering damage like rot or mold growth without changing the appearance of the wood itself.

They also allow moisture vapor transmission, which means water won’t build up under them as it would with other types of coatings such as oil-based products or urethane that don’t allow moisture through their pores at all. This makes them ideal for use on exterior surfaces where protection is needed.

Still, breathability is not only desired but necessary if you want to avoid problems down the road due to trapped water vapor leading to potential issues like warping or cupping in extreme cases when left untreated long term over time by using a product that doesn’t allow any natural movement at all between boards and surrounding materials like concrete slabs below decks.

Make sure to coat the Balusters

Did you remember to coat the balusters? Balusters are the vertical posts that hold up your railing. They can be made of wood or metal and often get weathered over time. It’s essential to ensure they are coated with a protective layer before re-installing them on your new deck.

Otherwise, water will seep into the cracks between each baluster and cause rot in just a few years!

Don't forget to cover problem areas

Don’t forget about any cracks in the boards themselves – these should also be filled with wood filler before staining or sealing too! It’s essential not only for appearance but also for protecting against water damage down the road as well.

The Bottom Line

You don’t want to spend thousands of dollars replacing your entire deck when there is an easy way out. Restoring a weathered deck is not as difficult as it sounds, and with our help, you’ll be able to do it yourself in no time at all!

Our step-by-step guide makes the process painless and straightforward for anyone who wants their old wooden deck flooring to look shiny and new once more.

Once the professionals or DIY process has restored your new beautiful deck, it is vital that you maintain it regularly so that its beauty lasts year after year.