What’s the next big problem you are going to confront one you’ve have purchased a pressure washer?
Have you ever wondered how important it is to pick a good pressure washer hose?
Yes, you heard it right. Selecting the best hose for your washer is as important as opting for the best pressure washing machine. However, making the right choice of a hose is not a cake walk. There are a few things that one should consider while making its purchase. This is because; the power washer hose undergoes a constant abuse such as dragging, dropping, twisting, tugging and many more. Consequently, one needs to pay extra attention while electing for a good cleaning hose. So, below listed is a curated guide to which are the best pressure washer hoses in 2019 and how to choose one that serves you the best and delivers you the value for the money spent. Here you will discover everything that you need to know about the hoses for your washers when you are making a purchase.
As a matter of fact, the market is stuffed with a number of hoses, but not all are qualitative. But there is nothing to worry about. With rigorous research and some genuine feedbacks, we have curated a list of the top 5 best water hoses for the pressure washer in 2019. They are:
Hose: 60 percent lighter than rubber
Maximum Pressure: 3700 PSI
Material: TPR (Thermoplastic Rubber)
Temperature range: 4 to 140 degrees F
SIMPSON Cleaning MorFlex 40226
Hose: 5/16" x 50'
Maximum Pressure: 3700 PSI
Material: Lightweight polyester
Temperature range: 140 degrees F
Briggs & Stratton 1/4-Inch
Hose: 1/4" x 25'
Item Weight: 1.81 pounds
Temperature range: 140 degrees F
B & S, Craftsman, Generac & Karcher
Hose: 1/4” ID x 50’ Long
Maximum Pressure: 3,000 PSI
Molded black bend restrictors on both ends
Ends: (2) 22mm-14 Female twist connects
Hose: 1/4" ID x 25'
Maximum Pressure: 3,100 PSI
Black bend restrictors on both ends
Temperature range: 140 degrees F
One of the good quality hoses for cold water is Apache 10085591 5/16″ x 50′ Pressure Washer Hose. It is 50’ pressure washer hose with a power to tolerate the temperature ranging from -4 degree to 140 degrees Fahrenheit. It is considerably light in weight when put to use. If you are looking for a hose for the residential pressure washer then this is the best choice. Apart from being made of good quality material, its length is sufficient to serve your purpose without affecting the water pressure. Furthermore, it is easy to connect with your main device and spray gum. And what is even more exciting, that it is really inexpensive yet durable.
Check how much you can save, buying the Apache 10085591 on Amazon >>>
With the usage of the hose that you get with the pressure washing machine, it gets spoilt or at times you require a new and qualitative hose. Following that SIMPSON Cleaning MorFlex 40224 Coldwater hose is considered to be one of the best electric and gas pressure washers available in the market. It is made of good quality material and can also tolerate high-pressure water. It is considered to be a high-quality hose that can also be used with your gas powered pressure washers. Moreover, it is quite easy to use as it enables you to easy connection and removal.
As mentioned above any hose that serves your purpose and fits your washing machine is considered to the best hose for your washer. Briggs & Stratton ¼-inch Power Washer Hose is another qualitative one that befits your machine conveniently. It is considered to be not that heavy, so one can comfortably work with it. Also, this hose will not cost you much but will deliver amazing results
This is a Schieffer textile braided hose which specially devised for electric power washer and gas power washer and is made in the USA. This hose can be used for medium cleaning purposes and have a tolerance level of up to 3000 PSI water pressure. For the high-level cleaning, you will be in the need of top rated surface cleaner which will handle your all cleaning problem.
Check how much you can save, buying B & S, Craftsman the on Amazon >>>
Yet another best hose in 2019 is UBERFLEX Kink Resistant Hose 1/4″ x 25′ 3,100 PSI with (2) 22MM. It is considered to be one of inexpensive yet effective hose that covers a larger area.
It is always advisable to spend a considerable time on researching for a good hose for your pressure washer before making the final purchase. As a rule of thumb, you should be aware of what are the requirements of your pressure washer and what you are looking for in a new hose. Prior to buying a new one or replacing an old one, you should be well-versed with the different types of hoses available in the market. Although, the market is loaded with a wide range of hoses, yet they all differ from one another in various aspects. These aspects are important things to consider while buying one and that too in compliance with your needs. Subsequently, below runs the list of such factors that can assist you in making the best purchase.
To begin with, you should first examine the specifications of the hose required, such as its material, what should be the ideal length to cover up your large area. For instance, if you have a large area, you should go for a hose with the relevant length and if it is a short area then vice versa. Ensure that it is quite complicated to work with a large hose in a comparatively smaller area. Thereupon, make a wise choice, keeping this factor in mind.
Different machines use hoses with different diameters. So, before buying a hose, you should take its diameter into account. This is important because not every hose pipe will fit on all the machines. However, it is recommended to use a hose that is ¼ in diameter, for the machines with up to 2700 PSI. Whereas for the washers with PSI between 2700 to 3400, a pipe with 5/16” diameter is applicable. Probing further for the power washers with a maximum pressure strength of 5000 PSI, a hose which is 3/8” in diameter is operable.
Most power washer hoses are composed of one of the three kinds of materials that are PVC plastic, rubber or polyurethane. However, PVC is the most commonly used material, but it is not at all user-friendly since it makes the hose inflexible which make the task too taxing for the user. Whereas those of rubber is considered to be the flexible hoses, but they are hulking and might also leave scuff marks on the concrete or other surfaces if not used with caution. Furthermore, the polyurethane hoses are steel braided and have a rubber coating which makes it flexible in use.
As a matter of fact, the high-pressure hose should be connectable at both the ends. One end of it should be connected to the main device and the other to the spray gum. Prior to that, you should inspect the connection type of the pressure washing machine, whether it snaps into the place or screws into it. Apart from that, you should also consider whether the connector attached to the spray gun is a male or a female. Although you can buy either the male or female connector, working with a male type connector is much easier.
It is quite complicated to work with an electric pressure washer hose since it is not feasible to shift your machine here and there. In such cases, large hoses are of great help. Whereas if you have a gas pressure washer, then it is easier to move, so even a short length water pipe will be apt for it. Generally, people employ a hose which is of length somewhere between 20 to 50 feet. These are excellent to work with as they do not put much pressure on the main device and delivers outstanding results.
Improper coupling is one of the major reasons responsible for the failure of the pressure washer hose. For instance, if the hose is ill-fitted into the main device or the spray gum, it might lead to mishaps like flying off of the fitting which can be injurious to someone nearby. It can also lead to costly affairs like leakages which are expensive to address. Always ensure that you follow the assembling guidelines that pertain to your equipment’s size and application.
When a hose is not properly assembled, that is if the barb of the fitting cuts into the hose’s tube, it can lead to dangerous situations. Fittings need to be appropriately inserted to meet the recommended depth of insertion. If it fails to meet that depth, then the product being conveyed can find its way into the reinforcement which would further lead to bubbling or blistering the cover, leaving a failed equipment.
These failures are frequent when they are flattened which means the minimum bend radius is not met. As a matter of fact, if the bent radius has exceeded the standard one then the tube is considered to be flat in that specific area. This consequently hinders or restricts the flow of the product.
Since the hoses are consistently put through rigorous applications, this eventually damages them. If not examined on a regular basis, the abrasion caused might lead its assembling to burst and leak. Excessive rubbing of the hosepipe against any external object can lead to the wear and tear of its cover which further effects the reinforcement layers.
Hose and fittings are a combination of different materials coupled with complicated ways of manufacturing. Various factors like inconsistency in machinery, human errors or poor quality product or raw materials can result in improper operations which further leads to its failure. Mixing and matching of the incompatible objects, couplings or clamps are also responsible for the failure.
Exposing the polyurethane pressure washing hose to the external temperatures can leave the polymers hard or stiff which further results in cracking as the hose bends. If the increased temperatures have damaged your product then it calls for the time to replace it with a model that is best suited to the heat exposures.
The selection of pressure washer depends on its usage type. firstly You need to figure out whether you will be using the washer to clean outdoor surfaces or indoor surfaces. By highlighting such factors, you will be in a position to determine whether you need a washer that wheels to make it easier for its movement or a washer with no wheels if you need accessories like good pressure washer wand.
Failure in monitoring and maintaining your hose can be both expensive and dangerous for you and your staff. Certain issues like kinks split and missing brackets can be addressed and fixed in time to avoid any failures. Consistent monitoring for any abrasions caused due to rubbing of the hose against machinery is an equally important aspect of maintenance.
The following FAQ’s (Frequently Asked Questions) are based on some genuine high-pressure power washer hose attachment reviews, that will help you understand some basic concepts of this equipment. So, let’s quickly dive into the list of these FAQs.
Irrefutably, these hoses are a crucial part of any pressure washing machine. Thus, it becomes inevitable to consider all the factors while buying one for you. Ensure to take into account all the factors namely: length, material, diameter, and connections. Undergo a self-assessment before making any purchase, considering your needs like what could be the best option for your machine. Besides that, we hope that the above-listed best washer hoses in 2019, will be of some help to you when advancing to shop one.
Now that you have this complete guide to how to choose the right hose for your power washer coupled with which are the best one available in the market will inevitably help you in making a wise choice.