The DuraMax Flo n’ Go LE Fluid Transfer Pump is the most convenient hand-powered pump. It features a large 14-gallon fuel container with wheels, providing enough capacity for almost any vehicle fuel tank. Made from durable polypropylene, the fuel container can resist dents, corrosion, and rust. The large wheels also make it easy to wheel around, which is great when transferring gallons of fuel. For added convenience, the container includes a holder for the hose and pump. You can also switch between siphon mode and pump mode.
With the Tera Pump TRFA01, you can finally eliminate the risk of overfilling your tanks. This simple, battery-powered pump includes a no-spill, auto-stop nozzle. It also comes equipped with an extra long 35-inch discharge hose, allowing you to place the gas can on the ground instead of needing to hold it. The pump features three different adapters for securing the hoses to different fuel cans. It should fit most cans without any problem. This product recently underwent several upgrades and now features a rain-resistant power cover for use during rainy or misty conditions. The manufacturer also moved the auto-stop sensor, resulting in 5% to 10% faster flow rates.
👉Weighs 11.2 ounces
👉Measures 26.2 x 3 x 3 inches
👉5 to 6 quarts per minute flow rate
👉Suitable for pumping gas, water, oil, and other non-corrosive liquids
The battery-operated Sierra Tools Liquid Transfer Pump is the most economical choice. The streamlined design is efficient, affordable, and lightweight. The pump measures just 3 x 3 x 26.2 inches and weighs less than a pound. As it takes up hardly any space, you can store it in the trunk of a car or keep it in a toolbox. Operating the device is also easy. You simply insert one end into the fuel container and the other into the tank. You then press a button and wait for the pump to finish transferring the fuel or oil.
If you do not mind manually pumping, this option for Koehler Enterprises provides the lowest cost solution. It is a basic hand pump siphon with two hoses. You hold the device in one hand and manually pump with the other, allowing you to control the flow rate and avoid spills. As a manual pump, it does not feature any electronic components. There are fewer parts to break, increasing the service life of this affordable pump.
Bravex built this inline electric pump for installation in machinery, such as cars, boats, lawnmowers, generators, and other equipment that use 12-volt batteries. The device offers an output pressure of 2.5 to 4 PSI with an input voltage of 12 volts. It also comes with a two-year warranty. It achieves the highest suction at up to 12 inches. If your tank is deeper than a foot, the pump may struggle to draw fuel.
While this is a replacement fuel pump, you may use it for other applications. If you keep a 12-volt battery around, you can use it in the garage for transferring fuel or oil from your pressure washer and other light-duty equipment.
👉Comes with a 13-foot fuel hose
👉Requires a 12-volt power source
👉Measures 12.5 x 12.3 x 7.4 inches
👉Weighs 16.85 pounds
👉10 GPM flow rate
This compact electric fuel transfer pump kit from FUEL WORKS includes everything needed to transfer diesel from almost any machine. Thanks to the portable design, it offers a simple solution for working with boats, RVs, and agricultural equipment. The kit includes a powerful electric pump with a 13-foot fuel hose and a manual dispensing nozzle. The nozzle lets you start and stop fueling instantly, preventing spills and overflow. The pump is powerful, offering a fast flow rate, but the manufacturer advises against using this pump for transferring gasoline. The electric pump only handles diesel. Gasoline, oil, and other liquids may damage the pump.
The durable Fill-Rite offers heavy-duty pumping action and a design built for permanent installation in your garage or work area. Made from cast iron, the housing can last for decades, even in the toughest operating conditions. After connecting it to a 12-volt power source, the pump provides a suction lift of up to 6.5 feet. You should have no problem getting every drop of oil or fuel out of any tank. The pump also includes a manual dispenser nozzle. As with the nozzles at a gas station, you can easily stop or start the flow, preventing overfilling.
👉Transfers up to 9 GPM
👉Includes LCD display
👉1/2-inch female inlet
👉Measures 13.8 x 5.3 x 6.3 inches
👉Weighs 3 pounds
Stop overfilling your oil. The LUBEWORKS heavy-duty oil transfer pump includes an oil preset meter gun for tracking the flow of oil through the pump. The large display lets you track the flow of oil in liters, gallons, pints, or quarts. After pumping the preset amount of oil, the device automatically shuts off and stops dispensing. The pump also features an ergonomic design with shockproof rubber housing. It resembles a gas pump nozzle, with a trigger handle and an inlet and outlet on each end.
With the 12V ARKSEN Fuel Transfer Pump, you can make short work out of transferring liquids. This powerful pump provides a flow rate of up to 20 gallons per minute. The electric pump allows the transfer of a variety of liquids, including kerosene, heptane, hexane, diesel, gasoline, oil, and even mineral spirits. The pump also comes with a nozzle, hoses, and a 2-inch male NPT adapter. You get everything needed to start transferring liquid, except for a power source. You should also enjoy years of use, thanks to the high-quality craftsmanship and durable materials. It features thermally protected, explosion-proof cast iron housing for the main pump body.
Fuel transfer pumps can be a very useful thing to own. They make it possible to easily transfer fuel but not all of the options are going to be as good as others. Today you can take a look at everything that you need to know about fuel transfer pumps. This buying guide will provide you with the necessary information to make an informed decision so read on to learn all of the details.
Before going any further, it’s important to understand what a fuel transfer pump is. Basically, this is a device that is designed to transfer fuel from one source and put it in another piece of equipment or vehicle that is in need of fuel. This is possible due to a high-pressure sucking mechanism that pulls the fuel from the source and sends it to its new location. Many people make use of fuel transfer pumps to help refuel construction vehicles or other types of large machinery.
Now that you know the basics, it’s time to take a look at what factors you need to take into consideration when buying a fuel transfer pump. There are many different features and characteristics that you should keep in mind when buying one of these. Pay close attention to the information below and it will be much easier to find the perfect fuel transfer pump to suit your needs.
It’s important to know that some fuel transfer pumps are not going to be capable of transferring certain types of fuel. There are models out there that are specifically meant to be used for transferring diesel. Buy a model that can transfer the type of fuel that you need to transfer and know that some models will be more versatile than others.
You want your new fuel transfer pump to be as durable as possible. Everything should be able to withstand some punishment and be able to stand up to very regular use. This will allow you to get the most out of your investment.
Certain fuel transfer pumps are more user-friendly to operate than others. Try to look into how easy it is to install and make sure that it comes with thorough instructions. You don’t want to be left feeling confused after buying one of these.
A good fuel transfer pump needs to be safe to operate. Some models are even going to be explosion-proof, making them even safer to use. Buy a fuel transfer pump that has at least gone through stringent quality control tests to ensure that it is safe to operate.
You also need to consider the voltage of the unit that you’re buying. If you’re going to be buying an electric pump, then you need to get one with the right voltage to match the output of the engine. If you don’t do this, then you’re not going to have a very good experience.
As long as you keep all of the above factors in mind, you should be able to buy a very good fuel transfer pump. Just remember to take your time to get something that will be worthwhile. There are many good fuel transfer pumps on the market. You should be able to find the perfect option that will meet your needs while staying within your allotted budget.
Fuel transfer pumps are important devices for those who need to refuel construction equipment or other types of large machinery. This is a machine that can transfer fuel from one source and put it into a piece of equipment or vehicle that needs it. They’re very useful and you may very well want to buy one. There are several different types to consider so take a look at the differences below before proceeding.
Engine-powered fuel transfer pumps are paired with an engine. They work by having the impeller shaft of the pump connected to the propeller shaft of the engine that it is paired with. These usually make use of some type of centrifugal pump.
Certain fuel pumps are going to be battery-operated as well. These will run on a battery and are generally very user-friendly. Some models are going to be more powerful than others depending on the size of the battery as well as certain design choices.
Those who want to buy a fuel transfer pump that is as cost-effective as possible may want to consider a manual pump. These are very affordable but they might also be the most cumbersome. You’ll need to operate this type of pump manually and it requires quite a bit of effort to transfer fuel this way. You’ll be rotating a hand pump in order to draw the fuel out of the source if you decide to go this route.
Electric fuel transfer pumps are among the most popular options on the market. You’ll find them available in both direct current and alternating current variants. Most electric fuel transfer pumps are made to be especially durable and safe. You’ll find that many are safe from explosions due to the incredibly tough casing used to make them.
The above types of fuel transfer pumps are all distinct from one another. Certain types might appeal to you more or less depending on your needs. Keep all of them in mind and be sure to read the information about them before coming to a final decision. Getting the right fuel transfer pump for your needs shouldn’t be hard and you’ll be able to get one that fits right in your budget range.
You May Wants To Know:
Last update on 2019-08-20 / Affiliate links / Images from Amazon Product Advertising API